订阅我们的 Telegram 新闻频道 Cryptoage,了解所有最新趋势。
挖矿、空投、交易、指南、技术、投资——应有尽有!!!

ForgeMiner v1.9.1
Nov 3, 2026
ForgeMiner v1.9.1
Fixes for what 1.9.0 users reported, Pearl faster on the RTX 50 series, NVIDIA voltage on every RTX 20–50 card, --mclk with any clock the card lists, a fan curve per card, and a long round of fixes to pools, shutdown and the overclock flags.
Fixes for 1.9.0 reports
- Pearl on the RTX 30 / 40 series with a driver older than 580: the default kernel made the miner restart again and again. It now loads on those drivers, and falls back to
--kernel 2on its own where it cannot. - Pearl on the CMP 30HX mined at 0 H/s in 1.9.0; it now has a kernel of its own.
- KawPow on the RX 470–590: from epoch 613 on, the DAG build could hang the card. Fixed.
--fan-curvestayed on its first point when the curve was written with spaces (40:30, 60:60). Fixed.
Faster
- Pearl on the RTX 50 series: up to +2% hashrate on the same overclock.
- Iron Fish on the RX 470–590: about +8%. Quantus on AMD: +0.3…1% on every series.
Overclock, voltage, fans
- NVIDIA core voltage on Linux:
--vddcand--vddoffnow work on every RTX 20 / 30 / 40 / 50 card. A card a request does not fit is skipped and the other cards are still set; the reason is shown in the dashboard. --mclkon the GTX 10 / 16, RTX 20 and CMP 30–50HX: any memory clock the card lists, not only 810. A clock the card does not list is refused with the list. If the driver accepts a memory clock but does not hold it, the miner says so instead of reporting success.- A fan curve per card:
--fan-curve 45:30,70:90/40:40,70:80/*, one curve per card in--gpuorder,*leaves the card to the driver. --cclkabove a card's highest clock now says what the driver will actually run.--oc-resetworks per card on mixed rigs and with--gpu all.- AMD: fans go back to their own speed on exit.
Pools and stability
- Two failed connections move to the next pool in the list, and the first pool is taken back when it returns.
- Every way out — Ctrl+C,
miner stop, an error — hands the cards back and ends within seconds. - Quantus: a card that hits a CUDA error restarts by itself while the other cards keep mining.
- NOID dev fee: 2% (was 2.5%).
- A pool that hangs up on every full-size Pearl share gets one clear warning to mine on another pool.
- Windows rigs without an AMD card no longer load the AMD OpenCL runtime.
- Linux: if the AMD cards are hidden from the user running the miner, it says to run as root instead of failing on the NVIDIA path.
- HiveOS: a
--gpuin a trailing comment no longer applies, and backup pools with a scheme in the URL work. - The RTX 50 series, and NOID on the RTX 30 / 40 series, need NVIDIA driver 580 or newer (unchanged).
- HiveOS custom miner — upgrade with the versioned URL:
https://github.com/0xHashRaptor/ForgeMiner/releases/download/v1.9.1/ForgeMiner-1.9.1.tar.gz.
Checksums (sha256)
53c515b4160b5f51945573ed15ebb69c49de8e5798c24fb5dfdc3adb1739d867 ForgeMiner-1.9.1-windows.zip
10bb590103515f8dfbea0d0bb8b15f1b6ccf9a48219fee39f1d0bf8304396fd4 ForgeMiner-1.9.1-linux.tar.gz
e92d64938cf9b5d011f6b8b9c81a9ef3e82017ac22ef51b2a5fd42cf4f866188 ForgeMiner-1.9.1.tar.gz
Русский
ForgeMiner v1.9.1
Исправления по отзывам на 1.9.0, Pearl быстрее на RTX 50, напряжение NVIDIA на всех картах RTX 20–50, --mclk с любой частотой из списка карты, своя кривая вентиляторов на каждую карту и большой круг исправлений пулов, выхода и флагов разгона.
Исправления по отзывам на 1.9.0
- Pearl на RTX 30 / 40 с драйвером старше 580: ядро по умолчанию заставляло майнер перезапускаться снова и снова. Теперь оно загружается на таких драйверах, а где не может — само переходит на
--kernel 2. - Pearl на CMP 30HX в 1.9.0 майнил 0 H/s; теперь у карты своё ядро.
- KawPow на RX 470–590: начиная с эпохи 613 построение DAG могло подвесить карту. Исправлено.
--fan-curveстоял на первой точке, если кривая записана с пробелами (40:30, 60:60). Исправлено.
Быстрее
- Pearl на RTX 50: до +2 % хешрейта на том же разгоне.
- Iron Fish на RX 470–590: около +8 %. Quantus на AMD: +0.3…1 % на всех сериях.
Разгон, напряжение, вентиляторы
- Напряжение ядра NVIDIA на Linux:
--vddcи--vddoffтеперь работают на всех картах RTX 20 / 30 / 40 / 50. Карта, которой запрос не подходит, пропускается, остальные всё равно настраиваются; причина видна в дашборде. --mclkна GTX 10 / 16, RTX 20 и CMP 30–50HX: любая частота памяти из списка карты, а не только 810. Частота не из списка отклоняется с перечнем. Если драйвер принял частоту памяти, но не держит её, майнер так и пишет, а не рапортует успех.- Своя кривая вентиляторов на каждую карту:
--fan-curve 45:30,70:90/40:40,70:80/*— по кривой на карту в порядке--gpu,*оставляет карту драйверу. --cclkвыше максимальной частоты карты теперь сообщает, что на деле поставит драйвер.--oc-resetработает по картам на смешанных ригах и с--gpu all.- AMD: вентиляторы при выходе возвращаются на свои обороты.
Пулы и стабильность
- Две неудачные попытки подключения переводят на следующий пул из списка, а первый пул забирается обратно, когда оживает.
- Любой выход — Ctrl+C,
miner stop, ошибка — возвращает карты и завершается за секунды. - Quantus: карта, поймавшая ошибку CUDA, перезапускается сама, остальные продолжают майнить.
- Комиссия NOID: 2 % (было 2.5 %).
- Пул, который рвёт связь на каждой полноразмерной шаре Pearl, получает одно понятное предупреждение — майнить на другом пуле.
- Windows-риги без карт AMD больше не загружают OpenCL от AMD.
- Linux: если карты AMD не видны пользователю, от которого запущен майнер, он пишет, что нужен root, а не падает на пути NVIDIA.
- HiveOS:
--gpuв комментарии в конце строки больше не применяется, запасные пулы со схемой в адресе работают. - Для RTX 50, а также для NOID на RTX 30 / 40 нужен драйвер NVIDIA 580 или новее (без изменений).
- HiveOS, свой майнер — обновляться по ссылке с версией:
https://github.com/0xHashRaptor/ForgeMiner/releases/download/v1.9.1/ForgeMiner-1.9.1.tar.gz.
Контрольные суммы (sha256)
53c515b4160b5f51945573ed15ebb69c49de8e5798c24fb5dfdc3adb1739d867 ForgeMiner-1.9.1-windows.zip
10bb590103515f8dfbea0d0bb8b15f1b6ccf9a48219fee39f1d0bf8304396fd4 ForgeMiner-1.9.1-linux.tar.gz
e92d64938cf9b5d011f6b8b9c81a9ef3e82017ac22ef51b2a5fd42cf4f866188 ForgeMiner-1.9.1.tar.gz