Krig 1.8.1 lets RTX 4090 and 4070 Ti mine Pearl at full speed with memory locked to 405 MHz

Krig 1.8.1 came out today, 19 November 2026, one day after 1.8.0. Both releases target the same thing: mining Pearl (PRL) on NVIDIA cards with video memory locked to 405 MHz without losing hashrate. Until now that mode cost a lot of speed on RTX 40 cards in Krig; according to the developer's notes (Krig 1.8.1 release), it now runs about four times faster than before.

New figures from the release notes

All numbers are the developer's own tests on pearl-pow. Efficiency is our calculation: hashrate divided by power.

  • RTX 4090: 328.7 TH/s at 450 W with memory at 405 MHz (+299%), about 0.73 TH/J.
  • RTX 4070 Ti: 168.5 TH/s at 256 W (+334%), about 0.66 TH/J.
  • RTX A6000: 140.8 TH/s at 272 W (+300%), about 0.52 TH/J.
  • RTX 5090 (1.8.0): 439.49 TH/s at 571 W at stock memory clock, 443.57 TH/s at 565 W at 810 MHz and 443.50 TH/s at 561 W at 405 MHz. That is about 0.77 vs 0.79 TH/J.
  • RTX 5060 Ti (1.8.0): 97.57 TH/s at 147 W at stock, 96.24 TH/s at 140 W at 810 MHz and 95.05 TH/s at 133 W at 405 MHz.

The RTX 5060 Ti shows the trade-off best: locking memory at 405 MHz gives up about 2.6% of hashrate and saves 14 W, about 9.5% of the card's power. On the RTX 5090 the hashrate at 405 MHz is even slightly higher than at stock, with 10 W less.

Drivers and platforms

  • 1.8.0 asks for NVIDIA driver 580 or newer for the best performance.
  • 1.8.1 adds the 405 MHz mode for RTX 50 cards on Linux with drivers 570 and newer.
  • Version 1.7.0 from 15 November had already added 405 MHz locking on Windows for RTX 3060, GTX 1650 and CMP 50HX (driver 621.14) and on Linux for CMP 50HX, 70HX and 90HX (driver 610.43.03).

What to do

  1. Update to 1.8.1, especially on RTX 40 rigs that already run with locked memory.
  2. Check the driver version before judging the result: an older driver can hide the gain.
  3. Measure your own card at stock, 810 and 405 MHz on the wall meter. The developer's figures are best-case tests, and the difference between cards of one model can be noticeable.
  4. Compare the result with the rewards you actually receive on your pool. Krig was made for Kryptex Pool (sign up), but also works on other pools.

The release does not change the network or the coin, only the efficiency of the miner. With Pearl rewards falling as more GPUs join, cutting 10 to 15 W per card is one of the few levers a home miner still controls.

#Krig#Pearl#PRL#pearl-pow#RTX 4090#RTX 5090#RTX 5060 Ti#memory clock 405 MHz#GPU mining#Kryptex Pool
2026. 11. 19. 오전 10:20