ForgeMiner v1.8.5

5 окт. 2026 г.

ForgeMiner v1.8.5

A large Pearl gain on the RTX 20-series, 8 GB cards get their profile back, faster Quantus, and a found share no longer stalls the card.

What's new

  • Pearl on the RTX 20-series (Turing) — a large gain. Until now only the RTX 2060 and the two CMP boards mined the tuned kernel; every other RTX 20-series card, Titan RTX and Quadro RTX fell back to a generic one that had never been measured against anything. They all mine the tuned kernel now — about +43% hashrate on an RTX 2080 Ti, and about +30% more hashrate per watt.
  • Fix — 8 GB cards get their deep profile back. 1.8.3 and 1.8.4 counted the memory headroom twice and dropped 8 GB cards (RTX 3060 Ti, 3070, 3070 Laptop, 2060 SUPER and others) to the basic profile: about 3% less hashrate, and on one reported rig a card that then produced only rejected shares. Both are fixed.
  • Pearl on the whole RTX 30-series. The faster path is now the family default instead of a single model — about +4% hashrate and +3% hashrate per watt.
  • Windows: memory use is fitted to the card's real free memory. On Windows the driver reports a per-process budget that does not include what other programs hold, so a card shared with a game, a desktop or another miner could be overcommitted — and Windows answers that by paging, which costs a large part of the hashrate rather than failing. Forge now fits against what is really free and keeps room for the desktop.
  • A found share no longer stalls the card. Every accepted share used to pause mining while its proof was rebuilt — about 100 ms on an RTX 3060 Ti, on every share. It is about 10 ms now, so fewer shares are lost on busy pools.
  • Quantus (--algorithm quantus) is faster again — about +4% on the RTX 30-series, +2% on the RTX 40-series and +2.5% on the RTX 20-series, with hashrate per watt up by the same amount — the cards draw no more power.
  • Overclock and fan flags now work on every coin. Quantus ignored --cclk, --coff, --mclk, --moff and --plimit completely, and --fan, --fan-curve and --oc-delay worked only on Pearl. Also fixed: on coins other than Pearl, a * or an empty slot in a per-card list shifted the remaining values onto the next card.
  • Pool difficulty is taken from the job's target when the pool does not state it — affects solo and some pool setups that leave the field out.
  • Smaller: the full per-card table and ASCII-only text when there is no console (running through PSEXEC or into a pipe); the debug output no longer prints internal names.
  • The RTX 50-series (Blackwell) requires NVIDIA driver 580 or newer (unchanged).
  • HiveOS custom miner — upgrade with the versioned URL: https://github.com/0xHashRaptor/ForgeMiner/releases/download/v1.8.5/ForgeMiner-1.8.5.tar.gz. HiveOS reinstalls a custom miner only when its installation URL changes.
  • Everything else is unchanged from 1.8.4.

Checksums (sha256)

00932919ca03878a66dc433298ee715c8f473dd08be114104095cf9d75aca20c  ForgeMiner-1.8.5-windows.zip
94a442738029c7edd757add0876f29814aeedf40a463af57b0a5c7ef45fc0f6d  ForgeMiner-1.8.5-linux.tar.gz
9508eabc3d12bca32a506885a5a81d64d67e5c29bfb3f0995512a0e36d9f0fe5  ForgeMiner-1.8.5.tar.gz
Русский

ForgeMiner v1.8.5

Крупный прирост Pearl на RTX 20, 8-гиговым картам возвращён профиль, Quantus быстрее, найденная шара больше не останавливает карту.

Что нового

  • Pearl на RTX 20 (Turing) — крупный прирост. До сих пор настроенное ядро получали только RTX 2060 и две платы CMP, а все остальные карты RTX 20, Titan RTX и Quadro RTX откатывались на общее ядро, которое вообще ни с чем не сравнивали. Теперь настроенное ядро мелют все — около +43% хешрейта на RTX 2080 Ti и около +30% хешрейта на ватт.
  • Исправлено — 8-гиговым картам возвращён глубокий профиль. В 1.8.3 и 1.8.4 запас видеопамяти считался дважды, и карты на 8 ГБ (RTX 3060 Ti, 3070, 3070 Laptop, 2060 SUPER и другие) откатывались на базовый профиль: около 3% меньше хешрейта, а на одном риге из-за этого карта стала выдавать только отклонённые шары. Исправлено и то, и другое.
  • Pearl на всей линейке RTX 30. Быстрый путь стал умолчанием для всего семейства, а не для одной модели — около +4% хешрейта и +3% хешрейта на ватт.
  • Windows: расход видеопамяти подбирается под реально свободную память карты. На Windows драйвер сообщает бюджет процесса, в который не входит занятое другими программами, поэтому карта, делимая с игрой, рабочим столом или другим майнером, могла оказаться переполненной — а Windows отвечает на это подкачкой, то есть не ошибкой, а потерей значительной части хешрейта. Теперь расход памяти подбирается по тому, что свободно на самом деле, с запасом под рабочий стол.
  • Найденная шара больше не останавливает карту. Раньше на каждой принятой шаре майнинг вставал, пока пересобиралось доказательство — около 100 мс на RTX 3060 Ti, и так на каждой шаре. Теперь около 10 мс, поэтому на нагруженных пулах теряется меньше шар.
  • Quantus (--algorithm quantus) снова быстрее — около +4% на RTX 30, +2% на RTX 40 и +2.5% на RTX 20, хешрейт на ватт вырос на столько же — карты не стали потреблять больше.
  • Флаги разгона и вентилятора теперь работают на всех монетах. Quantus полностью игнорировал --cclk, --coff, --mclk, --moff и --plimit, а --fan, --fan-curve и --oc-delay работали только на Pearl. Там же исправлено: на монетах кроме Pearl символ * или пустое место в списке по картам сдвигало остальные значения на следующую карту.
  • Сложность пула берётся из цели задания, если пул её не сообщает — касается соло и некоторых пулов, которые это поле не заполняют.
  • По мелочи: полная таблица по картам и только ASCII, когда консоли нет (запуск через PSEXEC или в конвейер); отладочный вывод больше не печатает внутренние имена.
  • Для RTX 50 (Blackwell) нужен драйвер NVIDIA 580 или новее (без изменений).
  • HiveOS, свой майнер — обновляться по ссылке с версией: https://github.com/0xHashRaptor/ForgeMiner/releases/download/v1.8.5/ForgeMiner-1.8.5.tar.gz. HiveOS переустанавливает свой майнер только когда меняется ссылка установки.
  • Всё остальное без изменений с 1.8.4.

Контрольные суммы (sha256)

00932919ca03878a66dc433298ee715c8f473dd08be114104095cf9d75aca20c  ForgeMiner-1.8.5-windows.zip
94a442738029c7edd757add0876f29814aeedf40a463af57b0a5c7ef45fc0f6d  ForgeMiner-1.8.5-linux.tar.gz
9508eabc3d12bca32a506885a5a81d64d67e5c29bfb3f0995512a0e36d9f0fe5  ForgeMiner-1.8.5.tar.gz

Download the assets below · docker pull hashraptor/forge · forgeminer.org · Telegram · Discord